Next product

0.50" Dia. 6V Electromagnet, DC, Holding - 3 lbs.

This industrial electromagnet magnet is equipped with 6 volts of direct current with 3 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

Features:

Electrical- Voltage: 6
Holding Force: 3 pounds
Amps: 0.28
Current: DC
Bolt Desc. or Thread Female 2-56
Lead Wire Ga: 28
Lead Wire Length: 11 inches
Duty Intermittent
Outer Diameter: .5 Inches
Height: .5 inches

The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

EM050-6H-222

1-10 items	$30.93 / each
11 or more items	$27.99 / each	save 10%
25 or more items	$23.79 / each	save 23%

Add to compare Added to comparison table

6014.pdf 81 kB
EM050 Generic Model 2-56 Mount.zip 18.7 kB

Holding Force
- Holding Force (Lbs.)
  3
- Note
  Our units are tested on a load cell under a standardized test method which uses direct contact with a bare 1215 CRS ground strike plates that are .250” thick and are equal or greater than the diameter of the electromagnets.
Electrical
- Voltage
  6
- Current
  DC
- Duty
  Intermittent
- Amps
  0.28
Configuration
- Quick Release
  No
- Encapsulation
  No
- Anti-Rotation Pin
  No
- Mounting Option
  Tapped Rear Threaded
- Bolt Desc. or Thread
  Female 2-56
- Mounting Screw Supplied
  NO
- Lead Wire Type
  TFE
- Lead Wire Ga.
  28
- Lead Wire Length (in.)
  11
Special Features
- High Temperature (500 f)
  No
- Magnetic Stainless (430FR)
  No
General Physical
- Outer Diameter (in.)
  0.5
- Height (in.)
  0.5