Electromagnets & Coils
Round Electromagnets

Round Electromagnets

Flat-faced round electromagnets or holding solenoids from 0.50" to 4.0" dia. These APW electromagnets or holding solenoids available with either thru hole mounting or a female tapped mounting threads. Round holding solenoid electromagnets are available in 3 vdc to 230 vac voltages holding 2 to 640 lbs.

 

Items: 19 of 240
  • 0.50" Dia. 24V Electromagnet, DC, holding solenoid - 2 lbs.
    • -32%

    0.50" Dia. 24V Electromagnet, DC, holding solenoid - 2 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 24 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 24
    • Amps: 0.04
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Duty continuous
    • Current: DC
    • Bolt Desc. or Thread Female 2-56
    • Holding Force: 2 pounds
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM050-24-222

    • $20.93
    Old price: $30.93 , you save $10.00
    • -32%
    More
  • 0.50" Dia. 3V Electromagnet, DC, holding - 2 lbs.

    0.50" Dia. 3V Electromagnet, DC, holding - 2 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 3 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical Voltage: 3
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.33
    • Current: DC
    • Holding Force: 2 pounds
    • Duty continuous
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.


    EM050-3-222-A

    • $30.93
    More
  • 0.50" Dia. 6V Electromagnet, DC, Holding - 3 lbs.

    0.50" Dia. 6V Electromagnet, DC, Holding - 3 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 6 volts of direct current with 3 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 6
    • Holding Force: 3 pounds
    • Amps: 0.28
    • Current: DC
    • Bolt Desc. or Thread Female 2-56
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Duty Intermittent
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

    EM050-6H-222 

     

    • $30.93
    More
  • 0.50" Dia. Electromagnet, 24 VDC, holding solenoid - 2 lbs

    0.50" Dia. Electromagnet, 24 VDC, holding solenoid - 2 lbs

    Not rated yet

    This industrial electromagnet magnet is equipped with 24 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 24
    • Amps: 0.04
    • Bolt Desc. or Thread Female 6-32
    • Current: DC
    • Holding Force: 2 pounds
    • Duty continuous
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

    EM050-24-222-A

     

    • $30.93
    More
  • 0.50" Dia. Electromagnet, 28 VDC, holding solenoid - 2 lbs.

    0.50" Dia. Electromagnet, 28 VDC, holding solenoid - 2 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 28 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 28
    • Amps: 0.037
    • Bolt Desc. or Thread Female 6-32
    • Current: DC
    • Holding Force: 2 pounds
    • Duty continuous
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

     EM050-28-222-A

    • $30.93
    More
  • 0.50" Dia. Electromagnet, 3 VDC, small holding solenoid - 2 lbs.

    0.50" Dia. Electromagnet, 3 VDC, small holding solenoid - 2 lbs.

    Score: 4.00 (votes: 1)
    No reviews.

     This industrial electromagnet magnet is equipped with 3 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical Voltage: 3
    • Amps: 0.33
    • Current: DC
    • Bolt Desc. or Thread Female 2-56
    • Holding Force: 2 pounds
    • Duty continuous
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

    EM050-3-222

    • $30.93
    More
  • 0.50" Dia. Electromagnet, 9 VDC, holding - 2 lbs.

    0.50" Dia. Electromagnet, 9 VDC, holding - 2 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 9 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 9
    • Amps: 0.11
    • Current: DC
    • Bolt Desc. or Thread Female 2-56
    • Holding Force: 2 pounds
    • Duty continuous
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM050-9-222

    • $30.93
    More
  • 0.50" Dia. Electromagnet, 9 VDC, holding - 2 lbs.

    0.50" Dia. Electromagnet, 9 VDC, holding - 2 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 9 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 9
    • Amps: 0.11
    • Bolt Desc. or Thread Female 6-32
    • Current: DC
    • Holding Force: 2 pounds
    • Duty continuous
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

     

     EM050-9-222-A 

    • $30.93
    More
  • 0.50" Dia. Mini Electromagnet, 6 VDC, holding - 3 lbs.

    0.50" Dia. Mini Electromagnet, 6 VDC, holding - 3 lbs.

    Not rated yet

    This industrial electromagnet magnet is equipped with 6 volts of direct current with 3 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.

    Features:

    • Electrical- Voltage: 6
    • Holding Force: 3 pounds
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.28
    • Duty intermittent
    • Current: DC
    • Lead Wire Ga: 28
    • Lead Wire Length: 11 inches
    • Outer Diameter: .5 Inches
    • Height: .5 inches

    The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM050-6H-222-A

    • $30.93
    More
Items: 19 of 240