
Round Electromagnets
Flat-faced round electromagnets or holding solenoids from 0.50" to 4.0" dia. These APW electromagnets or holding solenoids available with either thru hole mounting or a female tapped mounting threads. Round holding solenoid electromagnets are available in 3 vdc to 230 vac voltages holding 2 to 640 lbs.
-
0.50" Dia. Miniature Electromagnet, 6 VDC, holding solenoid - 2 lbs.
This industrial electromagnet magnet is equipped with 6 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.
Features:
- Electrical- Voltage: 6
- Amps: 0.16
- Current: DC
- Lead Wire Ga: 28
- Lead Wire Length: 11 inches
- Bolt Desc. or Thread Female 2-56
- Duty continuous
- Holding Force: 2 pounds
- Outer Diameter: .5 Inches
- Height: .5 inches
The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).\
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.
EM050-6-222
-
0.50" Dia. Round Solenoid Electromagnet, 6 VDC, holding - 2 lbs.
This industrial electromagnet magnet is equipped with 6 volts of direct current with 2 pounds of magnetic suck. It is not a quick release and does not offer encapsulation or include an anti-rotation pin.
Features:
- Electrical- Voltage: 6
- Current: DC
- Bolt Desc. or Thread Female 6-32
- Amps: 0.08
- Holding Force: 2 pounds
- Duty continuous
- Lead Wire Ga: 28
- Lead Wire Length: 11 inches
- Outer Diameter: .5 Inches
- Height: .5 inches
The included tapped rear-threaded mounted option offers superior versatility. The mounting screw is not provided and the lead wire type is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .240” thick and are either greater than or equal to the diameter of the electromagnets.
EM050-6-222-A
-
0.75" Dia. 12V DC Round Electromagnet, holding - 6 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 12 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin, encapsulation, or quick release. It does include a tapped rear threaded mounting option.
Features:
- Weight: 0.0600 Pounds
- Electrical Voltage: 12
- Bolt Desc. or Thread Female 6-32
- Amps: 0.08
- Current: DC
- Holding Force: 6 pounds
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 18 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-12-222
-
0.75" Dia. Circular Electromagnet, 12 VDC, holding - 6 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 12 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or quick release. It does include a tapped rear threaded mounting option and encapsulation.
Features:
- Weight: 0.0600 Pounds
- Amps: 0.08
- Current: DC
- Electrical Voltage: 12
- Bolt Desc. or Thread Female 6-32
- Holding Force: 6 pounds
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 18 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-12-212
-
0.75" Dia. Electromagnet, 115 VAC, holding - 6 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 115 volts of alternating current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or quick release. It does include a tapped rear threaded mounting option and encapsulation.
Features:
- Electrical Voltage: 115
- Bolt Desc. or Thread Female 6-32
- Amps: 0.01
- Current: AC
- Holding Force: 6 pounds
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 18 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-115ac-212
-
0.75" Dia. Electromagnet, 12 VDC, holding - 4.5 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 12 volts of direct current and can heft 4.5 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or encapsulation. It does include a tapped rear threaded mounting option and quick release.
Features:
- Electrical Voltage: 12
- Weight: 0.0600 Pounds
- Holding Force: 4.5 pounds
- Amps: 0.08
- Bolt Desc. or Thread Female 6-32
- Current: DC
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 18 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-12-122
-
0.75" Dia. Electromagnet, 24 VDC, holding - 4.5 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 24 volts of direct current and can heft 4.5 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pi.. It does include a tapped rear threaded mounting option, quick release and encapsulation.
Features:
- Holding Force: 4.5 pounds
- Weight: 0.0600 pounds
- Electrical Voltage: 24
- Bolt Desc. or Thread Female 6-32
- Amps: 0.04
- Current: DC
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 19 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-24-112
-
0.75" Dia. Electromagnet, 24 VDC, holding - 4.5 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 24 volts of direct current and can heft 4.5 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or encapsulation. It does include a tapped rear threaded mounting option and quick release.
Features:
- Weight: 0.0600 pounds
- Holding Force: 4.5 pounds
- Electrical Voltage: 24
- Amps: 0.04
- Bolt Desc. or Thread Female 6-32
- Current: DC
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 18 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-24-122
-
0.75" Dia. Electromagnet, 24 VDC, holding - 6 lbs.
Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 24 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or quick release. It does include a tapped rear threaded mounting option and encapsulation.
Features:
- Amps: 0.04
- Current: DC
- Weight: 0.0600 pounds
- Electrical Voltage: 24
- Bolt Desc. or Thread Female 6-32
- Holding Force: 6 pounds
- Duty continuous
- Lead Wire Ga: 26
- Lead Wire Length: 18 inches
- Outer Diameter: .75 Inches
- Height: .62 inches
The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).
*The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.
EM075-24-212