Electromagnets & Coils
Round Electromagnets

Round Electromagnets

Flat-faced round electromagnets or holding solenoids from 0.50" to 4.0" dia. These APW electromagnets or holding solenoids available with either thru hole mounting or a female tapped mounting threads. Round holding solenoid electromagnets are available in 3 vdc to 230 vac voltages holding 2 to 640 lbs.

 

Items: 1927 of 240
  • 0.75" Dia. Electromagnet, 24 VDC, holding - 6 lbs.

    0.75" Dia. Electromagnet, 24 VDC, holding - 6 lbs.

    Not rated yet

     Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 24 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or quick release. It does include a tapped rear threaded mounting option and encapsulation.

    Features:

    • Electrical Voltage: 24
    • Weight: 0.0600 pounds
    • Bolt Desc. or Thread Female 10-32
    • Amps: 0.04
    • Current: AC
    • Holding Force: 6 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

    EM075-24-212-A

    • $34.09
    More
  • 0.75" Dia. Electromagnet, 24 VDC, holding - 6 lbs.

    0.75" Dia. Electromagnet, 24 VDC, holding - 6 lbs.

    Not rated yet

    Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 24 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or quick release. It does include a tapped rear threaded mounting option and encapsulation.

    Features:

    • Weight: 0.0600 pounds
    • Electrical Voltage: 24
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.04
    • Current: DC
    • Holding Force: 6 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 10 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM075-24-212-B

    • $34.09
    More
  • 0.75" Dia. Electromagnet, 6 VDC, holding - 4.5 lbs.

    0.75" Dia. Electromagnet, 6 VDC, holding - 4.5 lbs.

    Not rated yet

    Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 6 volts of direct current and can heft 4.5 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin. It does include a tapped rear threaded mounting option, quick release and encapsulation.

    Features:

    • Weight: 0.0600 pounds
    • Electrical Voltage: 6
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.16
    • Current: DC
    • Holding Force: 6 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

    • $34.09
    More
  • 0.75" Dia. Electromagnet, 6 VDC, holding - 6 lbs.

    0.75" Dia. Electromagnet, 6 VDC, holding - 6 lbs.

    Not rated yet

    Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 6 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin or quick release. It does include a tapped rear threaded mounting option and encapsulation.

    Features:

    • Weight: 0.0600 pounds
    • Electrical Voltage: 6
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.16
    • Current: DC
    • Holding Force: 6 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM075-6-212

    • $34.09
    More
  • 0.75" Dia. Electromagnet, 6 VDC, holding - 6 lbs.

    0.75" Dia. Electromagnet, 6 VDC, holding - 6 lbs.

    Not rated yet

    Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 6 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin, quick release or encapsulation. It does include a tapped rear threaded mounting option.

    Features:

    • Electrical Voltage: 6
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.16
    • Current: DC
    • Holding Force: 6 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM075-6-222

    • $29.24
    More
  • 0.75" Dia. Round Electromagnet, 12 VDC, holding - 4.5 lbs.

    0.75" Dia. Round Electromagnet, 12 VDC, holding - 4.5 lbs.

    Not rated yet

     Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 12 volts of direct current and can heft 4.5 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin. It does include a tapped rear threaded mounting option, quick release and encapsulation.

    Features:

    • Weight: 0.0600 LBs
    • Electrical Voltage: 12
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.08
    • Current: DC
    • Holding Force: 4.5 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

     

    EM075-12-112

    • $34.09
    More
  • 0.75" Dia. Simple Electromagnet, 24 VDC, holding - 6 lbs.
    • -10%

    0.75" Dia. Simple Electromagnet, 24 VDC, holding - 6 lbs.

    Score: 4.00 (votes: 1)
    No reviews.

    Our industrial magnets are the highest quality currently on the market and this piece is no different. This particular solenoid, flat-faced magnet features 24 volts of direct current and can heft 6 pounds. It does not come with a mounting screw, nor does it feature an anti-rotating pin, encapsulation or quick release. It does include a tapped rear threaded mounting option.

    Features:

    • Weight: 0.0600 pounds
    • Electrical Voltage: 24
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.04
    • Current: DC
    • Holding Force: 6 pounds
    • Duty continuous
    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

    EM075-24-222

    • $26.32
    Old price: $29.24 , you save $2.92
    • -10%
    More
  • 0.75" Diameter Electromagnet With 12 VDC

    0.75" Diameter Electromagnet With 12 VDC

    Not rated yet

    APW Company has made a name for itself across the country or providing high-quality electromagnets that produce steady results. This piece features continuous duty direct current of 12 volts. It provides a holding force of 5.5 pounds with a tapped rear threaded mounting option. It does not feature quick release, an anti-rotation pin, and does not come with a mounting screw supplied. It does feature encapsulation.

    Features:

    • Electrical Voltage: 12
    • Bolt Desc. or Thread Female 6-32
    • Amps: 0.08
    • Current: DC
    • Holding Force: 5.5 pounds

     

    • Lead Wire Ga: 26
    • Lead Wire Length: 18 inches
    • Outer Diameter: .75 Inches
    • Height: .62 inches
    • Lead wire type: TFE

    The lead wire type included is a TFE. This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

    EM075S-12-212 

    • $35.36
    More
  • 1.0" Dia. Electromagnet, 115 VAC, holding - 19 lbs.

    1.0" Dia. Electromagnet, 115 VAC, holding - 19 lbs.

    Not rated yet

    This incredibly strong, space conservative electromagnet is more than capable to produce constant current and performance for all of your research and mechanical needs. It measures at a height of .78 inches with a one inch diameter. This specific electromagnet provides a through-hole mounting option with a shoulder bolt. You’ll be able to benefit from the continuous duty, with access to the quick release function and a TFE lead wire type. This round electromagnet does not provide encapsulation or an anti-rotating pin, but it does include the mounting screw needed for the specific mounting option.

    Features:

    • Holding Force: 19 lbs
    • Voltage: 115
    • Current: AC
    • Amps: 0.03
    • Bolt Desc. or Thread: 8-32 x 1
    • Lead Wire Type: TFE
    • Lead Wire Ga. 22
    • Lead Wire Length: 18 in

    This magnet cannot handle high temperatures (i.e. above 500 degrees fahrenheit) nor is it magnetic stainless (430 FR).

    *The holding force for this round electromagnet is tested on a load cell under a standardized test method. Our standardized test includes direct contact with a bare 1215 CRS ground strike plates. The plates are .250” thick and are either greater than or equal to the diameter of the electromagnets.

    EM100-115ac-122

    • $32.94
    More
Items: 1927 of 240